Safety PLC with muting

mikkel

Member
Join Date
Aug 2009
Location
Viborg
Posts
7
Hi guys
I have tried to find a solution in the forum but have failed :(
I am not new to PLC, but dont know anything about safety plc and muting.

I have the following equipment; ( all Allen Bradley )

GuardLogix 5561S = 1756-L61S
Guardlogix 55LSP = 1756-LSP
ControlLogix Standard Power Supply 1756-PA72
1791DS/ES CompactBlock Guard I/O = 1791DS-IB8X0BV4

I know for a fact that it has been used before to do muting.
Can anyone please point me in a direction of a solution ? ( guide, how-to, manual with muting ect. )

Thanks in advance
P.S. I`m Danish so English is not my best :)
 

Similar Topics

So I'm still a little new to LC muting, and currently do not have a test bench. THE SITUATION My LC function is set to manual reset. I mute the...
Replies
3
Views
925
I've ready through the the previous posts, and we've worked with safety design for a long time. In the past, we worked with Pilz directly, and...
Replies
9
Views
428
Hello, I have been programming with Logix for over 2 years now, my current job just put me on a job where we had to change some of our original...
Replies
7
Views
900
Hi guys, This my first time posting hope I get help in my issue.. I have Allen bradley control logix safety PLC (1756-L61S) connected with...
Replies
11
Views
2,251
Good evening, I'm primarily a Siemens user, but I have an incoming project where I need to use Allen Bradley everything. So far I know that the...
Replies
7
Views
2,587
Back
Top Bottom