Fuji Micrex-SX PLC

Steve_D

Member
S
Join Date
Jul 2002
Location
Albury/Wodonga
Posts
92
Guys, I am starting a programming project on a Fuji Micrex PLC. I found that their most powerful PLC doesn;t have in built PID functions... this is an (expensive) add on and although they state they have a "simulation" function, this appears to only be able to be done if you write the program in their "simulation" project where I would have thought I could run "my" project on a simulated CPU. Just wondering if there is anyonewith Fuji experience who knows of any other pot holes befor i Get too far.
 

Similar Topics

G
Fuji Micrex F50 PLC
I have a machine with 3 working fuju PLC's FPF56X-A10,FTF32X-N and FTF56X-A10. As the PLC's are obsolete I would like to download each,save the...
Replies
0
Views
2,352
gchild
G
C
Fuji Micrex SX PLC Ethernet Comms to AB Contrologix PLC
Has any one ever used a Fuji Micrex-SX PLC NP1L-ET1 Ethernet Module to communicate with an Allen-Bradley Contrologix PLC? Thanks
Replies
0
Views
3,857
Cisco Ibarluzea
C
Y
Fuji PLC MICREX-SX D300win or standard software
Did Any one know, where I can download it?
Replies
7
Views
13,973
T McLees
T
T
Fuji PLC MICREX-F
Hi, Did anybody work with Fuji MICREX-F PLC? I like to know how and where I can get manual and software.
Replies
0
Views
2,612
teal845t
T
E
FUJI MICREX CPU problem
i have a machine with PLC MICREX SPH300( NP1PS-117R) the battery is out of service and when the power shut and on again the program is not found...
Replies
0
Views
1,245
Eslam_Saeed
E
Back
Top Bottom