Multiplexer function in Micrologix Controller
- Thread starter noledge
- Start date
Roy Matson
Member
I use a timer to update a counter
Count = 1 select input 1
Count = 2 select input 2 etc.
What signals are you multiplexing?
Roy
Count = 1 select input 1
Count = 2 select input 2 etc.
What signals are you multiplexing?
Roy
Similar Topics
Does anyone have experience with the C++ programmable version of the Modicon BM85 Bridge Mux? Schneider provided a program that is throwing...
Is there such a device to send 2 or more 4-20mA signals over a single pair cable, digitally or however it needs to a box on the other end that...
Hi guys.
I have spent the past few weeks on Google looking at various solutions to my problem below. Any help you can offer, would be very much...
Can any body suggest me whether we can configure NW-BM85-000 Modbus multiplexer using Hyperterminal? If so can you specify the setting to be made...
We have a possible application coming up where we will be controlling the pneumatic brake on 33 unwinds. We are going to do a simple diameter...