DF1 Cable

The Plc Kid

Member
Join Date
Feb 2009
Location
Macon, Georgia
Posts
3,233
I am trying to find a serial cable to talk toslc 5/04 on the db9 port via rs232/DF1

I know there is a straight and angled version of this but i have been all over ab website and can't find a part number.

Can anyone help with a part #
 
I need an ab part # for the straight also. It is easier for us to order from ab.

Getting something from radioshack or bestbuy arounf here is like pulling teeth.

But they don't mind spending a couple hundred bucks on it from the ab distributor.

I have never been able to figure out that logic.

I stopped trying a while back. I just go with the flow.
 

Similar Topics

Does anyone know if it is detrimental to use a FULL straight through cable to connect these two. I know that the AB cable does not carry pin 9...
Replies
0
Views
1,975
Tried a straight through 9-pin RS-232 and a null model cable. No luck so far.
Replies
0
Views
1,546
hello, I am struggling to find the right communication cable pinout between vijeo designer and micrologix 1000 df1 for simulation purposes, and...
Replies
2
Views
3,729
Folks, A SLC503 used to be connected to the Internet via a Digi One IAP. During program download to the PLC the Internet connection was...
Replies
6
Views
11,898
Is it possible to use cable between ML1500 & operator panel to connect PLC to laptop if RS232-DF1 cable is not available. Kindly advice.
Replies
4
Views
14,878
Back
Top Bottom