Omron CJ1W-SCU21-V1

sttchui

Member
S
Join Date
Mar 2008
Location
kl
Posts
81
Hi,

Does anyone know how to read Omron ID reader VD-600-CA5 using Omron CJ1W-SCU21-V1 serial port 1???

I only need to read the data from the RFID reader. & save inside the PLC

ANY SAMPLE WILL HELP!

Thank you!

Regards!

STTCHUI
 

Similar Topics

R
Pulse Output PLC Omron CJ2M with CJ1W OD211
I have PLC Omron CJ2M with OD211 module. I want to use the pulse output and PWM output and this module. But i confuse how to activated this, i...
Replies
0
Views
103
rakhafrds30
R
P
Omron CJ1W
Good. ,how to connect the relay outputs to the CJ1W-OC211 card ?
Replies
6
Views
1,164
BobB
BobB
J
Omron CJ2M PLC with CJ1W-ETN21 card
Hello everyone, I would like advice on the setup below: CJ2M PLC: 192.168.10.01 (Subnet: 255.255.255.0) ETN21 - 192.168.20.1 (Subnet...
Replies
6
Views
1,854
Jothiswarup
J
J
PLC CP1L with CJ1W-CIF12 connected to OMRON MX2 drivers
Hello, I have an installation with an omron plc CP1L with a CJ1W-CIF12 module connected to eight omron MX2 drivers. I use the bus to modify the...
Replies
2
Views
2,147
joserc
J
K
Omron CJ1W-ETN21
Hello all, has anyone configured before 2 CJ1W-ETN21 in a single rack? I am trying to put 2 units of ETN21 couple with my CJ2M-CPU33 to act like...
Replies
1
Views
1,268
BobB
BobB
Back
Top Bottom