Omron Sysmac mini SP10

Hi,
Can somebody help me finding the programming software for Omron Sysmac mini sp10 ? I tried to use the Omron CX-One software but this unit is too old and not listed under proccessors name. There is no communication with the proccessor.
Tx.
Remzi

One of these will work. I believe it is the first link. Most likely will need old computer with real RS232 serial port and windows98 or older operating system running in DOS mode.
The download button is almost hidden at the bottom of the webpage.
http://forums.mrplc.com/index.php?autocom=downloads&showfile=82
http://forums.mrplc.com/index.php?autocom=downloads&showfile=81
See this thread for links and info on cables, manuals, and software. Be sure to read the whole thread, some of the links don't work and some of the info is not totally correct.
http://forums.mrplc.com/index.php?act=ST&f=17&t=347

P.S.
Here is a link with info on using very old software on newer computers. I have no idea if it will work for the Omron or if it is of any help. Others have said it works fine using it on an old SLC150 AB PLC, software, and interface.
Link:
http://www.plctrainer.net/DOSBOX.pdf

If you still have problems, please feel free to send me a PM. I may have some more info available.

Thank you !
R.S.