tuning PID

esmaiel

Member
E
Join Date
Aug 2009
Location
Tehran
Posts
15
Hi
I have three PID controller that i want to tune them.
which stategy do i use to tune them?
If i use "S7 Self Tuning PID", it is necessary i put a "FB 50" for any PID and tune them simultaneously?
Best Regards
 

Similar Topics

ryangriggs
Tuning PID loop - dealing with valve deadband and high sensitivity
Hello, I am attempting to tune a PID loop on a process. The process involves a valve with electronic actuator that has quite a high deadband...
Replies
10
Views
2,185
Lare
L
M
PID tuning woes
so i have 4 25gpm wells feeding a 1000gal tank (T-1), with an additional 15gpm from a decant tank for 3hrs every 12hrs. P1 and P2 both controlled...
9 10 11
Replies
154
Views
35,915
drbitboy
drbitboy
R
PID tuning on SLC 5/05
Hi everyone, yet another PID problem. I'm hoping I understand enough of the process I'm controlling that my request for help is reasonable. If a...
6 7 8
Replies
113
Views
28,065
MaxK
M
M
PID Tuning tool
A few months ago, I started to look into PID controllers and the tuning of first order processes. This has, partly thanks to you, resulted in a...
9 10 11
Replies
162
Views
62,311
destination unknown
D
ganutenator
embarrassing question regarding PID tuning
I haven't had to tune a PID loop in a very long time. It's actually a PI loop for a pulse width modulation s.v. What was the name of that tuning...
2
Replies
16
Views
4,113
ganutenator
ganutenator
Back
Top Bottom