flex/io with ethernet/ip

viraguen

Member
Join Date
Apr 2009
Location
Santiago
Posts
13
Hi,

Can I connect a flex/io with an adapter ethernet/ip directed to a PC with Rslink or other OPC server? And then read the status of its inputs on an HMI.
Or is always necessary a PLC between them?


thanks in advance.

Vicente
 

Similar Topics

Can anyone recommend a flexible 600-volt shielded ethernet patch cable? I have used them from Allen Bradley / Panduit before and they are too...
Replies
0
Views
60
Hi guys! We have a big project at work where we are migrating from 1305, 1336, 160, 70, and 40 drives to identical PowerFlex 525 models. Most...
Replies
3
Views
839
Hello, I have an existing application that has a Powerflex 700 with a 20-COMM-E adapter controlled by a Micrologix 1100 via Ethernet. The setup...
Replies
6
Views
1,151
I have a contractor at my water plant installing 3 brand new Powerflex 7000 VFD's for my High Service pumps. I would like to control these via...
Replies
6
Views
975
Hi All, I am working on testing a project with a Powerflex 525, final project will be a 755, and I am trying to reset the Elapsed kWh meter over...
Replies
3
Views
561
Back
Top Bottom