Connecting FM 357-2 with IM 361

imanh

Member
I
Join Date
Jul 2009
Location
tehran
Posts
21
Hi
I want to connect a FM 357-2 module to CPU 314 with IM 361. CPU 314 has three IO modules and also a CP for Profibus support.
IM 361 is in a rail with one IO module and the FM module.
The parametrization tool does not recognize the module. How should I configure it?
It seems that the module needs MPI connections.
 

Similar Topics

H
RSLinx Bridge Configuration? Connecting through another PLC
I have 2 PLCs. One is networked to our plant, and the other is networked to the first PLC via a 1756-EN2T. I could easily get the second PLC...
Replies
3
Views
69
dmroeder
dmroeder
T
PLC Delta DVP 12SE and HMI Kinco GL043E not propperly connecting
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Replies
0
Views
86
Tecnolaundry
T
J
Connecting a Micrologix 1500 to a PanelView Plus 7
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Replies
1
Views
129
jscampbell210
J
K
Connecting FactoryTalk Datalog to MariaDB
Hello, I was looking to store some values from our FactoryTalk Application using Datalog to a MariaDB. I see there is quite a bit of documentation...
Replies
1
Views
136
drbitboy
drbitboy
D
Connecting to a PLC through VM Ware
I haven't encountered problems connecting to a PLC through VM Ware but I am with this particular machine. I'm running Windows 7 on a Windows 10...
Replies
8
Views
259
arpus4KM
A
Back
Top Bottom