Hi
I've added a FM 357-2 module to a CPU 315-2 DP. There are three I/O modules before that in the rack.Slot number is 7.
I add it's component in STEP7 hardware cinfiguration but the SF light become red in both CPU and FM. the DIAG and STOP lights also turn on.
In Diag. Buffer of CPU there are several "Configurable Slot Empty Error":
Event 10 of 100: Event ID 16# 5961
Parameter assignment error in CPU module parameters
Parameter: module type
Input address: 304 of the module with parameter assignment errors
Error type: configurable slot empty
Operating mode: STARTUP (warm restart)
External error, Incoming event
12:26:40:384 pm 09/05/09
What should I do?
I've added a FM 357-2 module to a CPU 315-2 DP. There are three I/O modules before that in the rack.Slot number is 7.
I add it's component in STEP7 hardware cinfiguration but the SF light become red in both CPU and FM. the DIAG and STOP lights also turn on.
In Diag. Buffer of CPU there are several "Configurable Slot Empty Error":
Event 10 of 100: Event ID 16# 5961
Parameter assignment error in CPU module parameters
Parameter: module type
Input address: 304 of the module with parameter assignment errors
Error type: configurable slot empty
Operating mode: STARTUP (warm restart)
External error, Incoming event
12:26:40:384 pm 09/05/09
What should I do?