system Message on OP170b panel

Leushuis

Member
L
Join Date
Sep 2003
Posts
1
Hello

I have a problem with a OP170b, every 30 secons the system message number 70024 popsup on the screen, does anyone knowes the cause of this Message, I can not find the Message number in the Manual.

Greatings,

Robert
 

Similar Topics

C
for instructions on how to debug message "System Configuration mitmach"
I am currently using PLC's CPUE05 versamax GEFANUC, I get an error "system configuration mitmach" but could not overcome. Although I've replaced...
Replies
1
Views
1,702
RussB
RussB
C
message between two system
Hi all, i need to send message from slc 5/03 to a micrologix 1000. panelview300 is connected to the micrologix. Panelview1000 dh485 is...
Replies
6
Views
2,225
jstolaruk
J
I
Set points on a triplex system
Hello, I have no training in maintaining potable water systems, so forgive me if some of my terminology is far off the mark or if I'm focusing on...
Replies
0
Views
77
indykins
I
A
SLC messaging with a ControlLogix redundant system
I have a redundant ControlLogix being set up. This program reads a value from a remote site which happens to be SLC PLC. Rockwell mentions SLC...
Replies
2
Views
91
robertmee
R
D
Hardware Configuration Changes to Live Siemens System
Hi all, This is going to be a long post apologies. I'm also a complete beginner to the world of PLCs. I'm currently working on my first ever...
Replies
10
Views
434
mk42
M
Back
Top Bottom