Siemens ST800 Traffic Controller.

kanam316

Member
K
Join Date
Sep 2009
Location
johor
Posts
1
Hello,

I'm a newbies in here.Actually I have one question.Recently, I have try to use this one traffic light controller from Siemens, ST800.Anybody here have an experience using this controller.May I know what type of protocol is used in this controller.Thanks.
 

Similar Topics

A
reading data from siemens controller (profinet) to ethernet/IP controller
Hello I have a s7-1200 and I would like to read the tags present in this controller with my controllogix controller. The two controllers don't use...
Replies
3
Views
30
Manglemender
M
J
Emergency Stop reset Siemens
Hi need help why this “failure 5 emergency stop “ appears at every startup in the morning ? Have to shut off main switch at least 10 times on...
2
Replies
19
Views
245
John Lee
J
A
communication between two siemens plc's with different ip address
i have two plc 1. s7-1212dc/dc/dc ip; 192.168.0.1 2. s7-1500 1513-1pn ip; 192.168.3.2 i need to get data from plc1 to plc2. any idea how to do...
Replies
5
Views
88
mk42
M
D
Siemens
Hi everyone hope you'll well. Is it possible for me to download a Crack version of tia portal v13..sorry to say this but the software is very...
Replies
5
Views
185
Puddle
P
R
Siemens S314
I have established an online connection to a machine using an S314 processor. I am using an mpi connector and simatic manager. The online...
Replies
8
Views
166
JesperMP
JesperMP
Back
Top Bottom