aattanayake
Member
What I have:
1756-L61 (Controller)
1756-DNB (DeviceNet scanner)
1794-ADN (Remote Node)
1794-IE8 (8 analog input card)
My inputs are all 4-20mA and need to select the module to accept this input range. When I open the node from RSNetworx I can't get the control byte mapped to the PLC. I does not show any control output words. All I have is the 8 16 bit words for the 8 channels.
Can someone help me get the control word mapped to the PLC please?
Thanks
1756-L61 (Controller)
1756-DNB (DeviceNet scanner)
1794-ADN (Remote Node)
1794-IE8 (8 analog input card)
My inputs are all 4-20mA and need to select the module to accept this input range. When I open the node from RSNetworx I can't get the control byte mapped to the PLC. I does not show any control output words. All I have is the 8 16 bit words for the 8 channels.
Can someone help me get the control word mapped to the PLC please?
Thanks