Need to create string data base in omron

gwoford

Member
G
Join Date
Sep 2009
Location
Princeton, KY
Posts
1
I need to create a string data base in an omron program that will communicate to an omron NT30C OIT. I am confused as what I need to do to establish a data base that will hold several part numbers that will so that when picked on the oit it will go high? Rally lost here!!!
 

Similar Topics

B
I need to create an interval time.
I need to create an interval timer that will fire a point for one second .time five seconds and fire the point again for one second. and so on ...
Replies
7
Views
2,395
twbtxnca
T
D
I need help to make a Working Schedule for Make-up Air unit
I'm fairly new to Rockwell software, I've had some basic training in the past but nothing too advanced. My company and I use Reliable products for...
Replies
9
Views
238
padees
P
C
Need Help Accessing/Printing a Program - CIMPLICITY
Hi all, I am having issues accessing my Cimplicity software - the site code changed after re-install and I am no longer able to attain a new key...
Replies
10
Views
156
Steve Bailey
Steve Bailey
E
Need help updating E700 firmware from 2.x to 6.x. Have E700v610.bin file.
Good day all! Can someone help me with the procedure to update Beijers E700 firmware? The Panel I am working on is firmware 2.04v and I would...
Replies
1
Views
62
parky
P
dalporto
Logix - Structured Text - Need a hand
Good evening. I display the step number of a SFC on a display. Sometimes, on a trip, it goes quickly through many steps and I need to prove to...
Replies
1
Views
125
dalporto
dalporto
Back
Top Bottom