eserver315
Member
M8000 turns ON MOV function block, using DMOV statement move K10 to integer D100 and then to Timer T10 preset value
X1 turns On T10
Done Bit of T10 resets T10 to 0
MOV function – modifying counter logic with moving K10 to D10 and from D10 to C10- READ ABOUT ADD FUNCTION AND MAKE A LOGIC
X1 turns On T10
Done Bit of T10 resets T10 to 0
MOV function – modifying counter logic with moving K10 to D10 and from D10 to C10- READ ABOUT ADD FUNCTION AND MAKE A LOGIC