Old-fashioned
I find it still easier to post code in ASCII drawing.
1) Put the vB code in Enhanced Mode (radio button)
2) Press the LADDER button. The tag [ladder] appears.
3) Type your code exactly as you want it to appear. Like so:
-------
/ \
| O O |
| ¿ |
\ '~~~' /
4) Press the "Close Current Tag" button. The tag [/ladder] appears.
Or you can just type the vB codes
[ladder] and
[/ladder] by hand.
I admit that it's much quicker to create the ladder with RSLogix. But by the time you screen capture it, convert it to a JPG, and post it, you can almost do it as easily by hand.
Plus, you can draw more than one ASCII ladder per post. You are only allowed one attachment per post.