Omron C60K PLC not in Run

riyajahamad

Member
Join Date
Jun 2002
Location
Pune-India
Posts
133
Dear All PLC Experts,
One of my friend have Omron C60K PLC, after battery replacement PLC not going in "RUN". I understand by reading in this forum, to communicate with this I need Syswin Or LSS Software and Host link 3G2C7-LK201.
I checked with our Omron local representative but they are not in position to support as model is absolute.
My friend has send me attached picture showing some IC on PLC.

My doubt are :
1) Is it EEPROM ?
2) What are options to recover logic (program) from PLC.
3) Anbody from India who can have 3G2C7-LK201, help me to recover program.
Thanks in advance.
Riyaz,
Pune, India.

ic.jpg
 
Last edited:
But the local Omron representative is your link to Omron corporate who should be able to at least point you to someone who can help. I would lean on them a little harder for help; after all, its their product and who else would know more about it. Otherwise, re-consider them as a supplier for future projects.
 
Logic (Program) reterving without host link adaptor.

Dear jrwb4gbm & jstolaruk,
Thanks for your response.
My questions are :
1) Is Shown picture IC EEPROM ?
2) How to check that is logic (Program) present in PLC, without host link adaptor (I mean without communicating with PLC). No error on PLC and RUN LED not glowing.
3) Is it possible to read EEPROM using EPROM reader.
Thanks in advance.
Riyaz
 
1) yes, it appears it is though looking up the part number would verify

2) I don't believe there is another way

3) yes, but the information would be difficult (if not impossible) to decompile to the original source code.

Sorry, I don't really have a good answer for you - sad that your local Omron support is not willing to help.
 
Dear Mr. Riyaz ahemad
My self is responsible FA support for omron for pune region
followings are my contact details
Mr.Milind Dhake

Manager - Automation & Controls

Industrial Controls & Appliances Pvt. Ltd

03,Sinbainiwas,382/2 Gokhalenagar Road,

Near Deep Bunglow Chowk,Shivajinagar,

Pune - 411016.INDIA.

Telefax:91-20-25676824,25651802,25667898,25667899.

Mobile : 9823101920

E-mail: [email protected]


As per my knowledge you have not contacted us for C60K problem
if you have contacted any body in my office Please let me know the name

secondly you can drop down any time to our office with C60K PLC
we will do needful because we have LK201 unit
I hope you will give us a chance to serve you
 
Thanks for Support

Dear Mr. Dhake,
Thanks for your detailed reply, will contact you.

This time also this forum proved that it will connect right people.(y)

Riyaz
 

Similar Topics

Dear Friends. I need the information about a omron sysmac C60K PLC , which communication cable can be used to its programming, & whats the...
Replies
5
Views
4,323
Our small company ran into a huge problem... the battery in our Aqueous wash PLC exploded, and destroyed the PLC and Program along with it. We...
Replies
42
Views
11,846
I have a customer in the Baltimore area with an Omron PLC connected to an old CNC. I will be upgrading the CNC and want to eliminate the Omron by...
Replies
0
Views
1,418
Hi. I am trying to find out what software is needed and where I might be able to get it, to troubleshoot a customers Omron C60K PLC? Any help...
Replies
2
Views
2,045
I have a project where an existing Omron Sysmac C60K PLC needs to be modified to control some new equipment and two 0-10 volt analog outputs are...
Replies
7
Views
3,712
Back
Top Bottom