I just started using Eplan Electrical P8 and found that I'm having hard time utilizing it at it full potential. Could someone guide me on the following issues:
1. I would like to map all my PLC I/O list done in Excel into drawings so that when there are changes on the I/O the drawings will change automatically.
2. I would like to auto assign the ferrule label onto the cable by reference to the terminal block number and the PLC pinout.
3. Generate BOM.
Thank in advance!
1. I would like to map all my PLC I/O list done in Excel into drawings so that when there are changes on the I/O the drawings will change automatically.
2. I would like to auto assign the ferrule label onto the cable by reference to the terminal block number and the PLC pinout.
3. Generate BOM.
Thank in advance!
