I bought 1784-ktcx15 from e-bay to be able to program logix5000 processor by connecting the module to 1756-cnb. The unit came without any software.but I do have RSLINX on my computer. After I installed the unit in my computer (window 98 OP. SYS) my computer didn't regognize the card. when I list all the hardware my computer didn't list the 1784-ktcx15. What I should do. Thank you
1784-ktx
- Thread starter kafram
- Start date
Vetteboy
Member
- Join Date
- Jul 2002
- Posts
- 380
Hope this helps.....
There is a utility for the installation of that card on this page:
http://www.ab.com/support/products/pccards.html
There is a utility for the installation of that card on this page:
http://www.ab.com/support/products/pccards.html
Similar Topics
Hey everyone,
Ran into an issue on a customer's system a couple times recently and wanted to check if anyone might have any clue what's going on...
I have and old computer running controlview300 in dos. I’m try to update to rsview32. But the question I have now is getting communication...
Has anyone tried using a 1784-PKTX in a PCIe slot, using a PCIe to PCI adapter? :scratch:
Hi,
Previously we used SS5136SD DH+ cards for communicating with Allen Bradley SLC 5/04 PLC utilizing Wonderware free SST5136 DDE server. This...
Hi All,
A quick question.
I have one Computer with 1784 PKTX Card for interfacing with DH+ Network.
One PLC nearby control room has got:-
1. 2...
