DDE/OPC Logix5K Program Tags

cjnichols

Member
C
Join Date
Nov 2009
Location
Hunter Valley
Posts
6
Hi

Is is possible to read/write to the program tags via DDE/OPC.

I can currently do this with the controller tags but not the program tags.

Thanks

Chris
 
All

I have solved this, when referencing the program tags use 'Program:MainProgram.tagname' as the tag and the same details as the controller tags and alls good..

Enjoy

Chris
 

Similar Topics

D
RsLinx DDE/OPC Writing Register FTView
Hey Friends. I am currently trying to write approximately 700 tags from FtView13 to an Logix Emulate 5000. I am using rslinx DDE/OPC to create an...
Replies
0
Views
386
dhimas
D
T
OPC/DDE LInk not shown value in excel
Dear Friends; I copy the link of Tag value and paste it as a link in Excel but Cell shows #REF The images are attached where i am wrong...
Replies
1
Views
766
andrewwei
A
M
Rslinx Classic 3.9 Does not Show DDE/OPC tags
Hi, I am gonna use Rslinx classic 3.9 to copy DDE/OPC tags' link from CompactLogix CPU to Excel through Ethernet/IP but It does not show any of...
2 3
Replies
35
Views
12,045
Mray
M
W
OPC/DDE to Excel
HI, I created a RSLINX OPC/DDE topic and then copied the link in to excel and I'm getting a #REF Error in the cells rather than the data, anyone...
Replies
4
Views
1,762
roxusa
R
D
Dde/opc
Hello all, I set up a DDE/OPC connection to read data into an excel sheet about a month ago. It was working fine until yesterday when I noticed...
Replies
2
Views
1,924
DannyD303
D
Back
Top Bottom