Siemens DO4 configuration

jeramiah

Member
Join Date
Mar 2009
Location
Texas
Posts
53
Hi,
How are the Siemens ET200iSP DO4 modules configured? Part number 6ES7132-7GD00-0AB0

I am having a problem getting the DO4's to show outputs, I am using a Siemens 315-2DP PLC with a CP432-5 communicating via Profibus to a ET200iSP IM152-1

I am not able to find any info on these to show how they need to be set up (ie...addressing) Hardware config show each module uses 2 bytes.

Thanks
 

Similar Topics

OK. You guys helped me out a bunch with my first Siemens question. I found a bunch of issues with integrity checking the PLC programs I was...
Replies
3
Views
104
Hi, I have a 1214 on ip 192.168.0.100. This is connected to other modules through a switch on same network. I need to connect this to a company...
Replies
1
Views
95
Hello. I appreciate the insights here and the willingness to share. I've got a lot of Rockwell experience, but my Siemens experience is...
Replies
6
Views
130
Kindly, has anyone tried to control Lenze servomotors with Siemens S120 drives ? Any special hints ? Have some concerns for the resolver and servo...
Replies
5
Views
178
Hi everyone, I want to upload the program from my CPU317TF-2 DP to my PC via connecting to CP 343-1 Advanced since it has LAN ports and the CPU...
Replies
1
Views
119
Back
Top Bottom