Adding Fast Analog module in RSlogix5000

hi folks!

here i am with my debut in this forum.
I am using Rslogix 5000 ver17.2,have a fast analog module(1769IF4XOF2F)to be added to my project with L32E CPU. when i browse through the catlogue numbers of the module to add this analoge combi module in my RSLogix5000 software I am not able to view its catlogue number.
What should i do to add this module into my project....?
Someone please help me out ...!I am already running in short of time with my project....!

thanks in advance

Do you have an extra "F" in that part #?

I see the 1769-IF4XOF2

OG

yes there is an extra F after 2

the catlague number is IF4FXOF2F

You need to download the add-on profile from the Rockwell Website. Install the profile and it will add additional modules to the I/O list.

http://support.rockwellautomation.com/controlflash/SelectLogixProfileProd.asp?ID=12&FFID=F&UID=0

OG

Thanks you so much for the link,But i am stuck up at another point now.
I tried the link and i reached the rockwell automation site.It asked for my username and password.the same account which was valid even on saturday is has become invalid now.I am almost exhausted after trying for creating new account for more than 15-20 times and not being able to create one. I have now idea why...?can you please help me out in this.

If you already have the downloaded copy with you can you send it through mail....?Or through sendthisfile.com or someother place where i can download without rockwell user account.

I forgot to mention my mailid. its "[email protected]"