Frame of CC-Link

honzacerv

Member
H
Join Date
Nov 2009
Location
Liberec
Posts
2
Hi guys,

how look frame of CC-Link? I have master station (QJ61BT11N) and I/O modules (AJ65SBTB1-8TE and AJ65SBTB1-8D). When I connected oscilloscope to data points DA and DB i have some sequence of "0" and "1" but I thing it´s in a bad way.

Do anybody know how look this frame?

Thank you very much
 

Similar Topics

C
Hostlink Frame CheckSUM
Hey everyone, just to let anyone know that if there looking for a framechecker program to manually check the frame checksum of a hostlink...
Replies
1
Views
4,404
JesperMP
JesperMP
B
Discrepancy in Data Frame Length from PLC-2 Unprotected Read Command
Hello everyone, I'm working with an old ACM3710 device and I'm encountering an issue with the data frames I'm sending over an RS232 connection...
Replies
5
Views
680
Barbue
B
J
The wireframe mystery
Factory Talk ME station V10.01 Studio is v32 Below is a pallet with password visibility. I have rendered this before in other applications but it...
Replies
3
Views
2,070
Jeev
Jeev
S
Multiple VFD's with Varying frame sizes in same enclosure?
Is it OK to have multiple Frame size VFD's inside the same enclosure that will be dedicated to VFD's only or is there any code/regulations against...
Replies
4
Views
1,767
Rob...
R
S
PLC-5 and Mutliple RSView32 PCs - Occasional Wireframe of Tag Data
I have been working on and off with a customer who has a PLC-5/80E that is communicating with five different PCs that are running RSView32 v...
Replies
3
Views
1,729
Ken Roach
Ken Roach
Back
Top Bottom