504bloke
Lifetime Supporting Member
After some advice on best makes for our application
Pulling Wheels from Axles - Pull 50Tonnes
Need to graph and record this, will be using a G306
So ideally we dont want any analogue signals, ideally we want the cell to talk comms like modbus/ethernet etc directly to the G3
Any suggestions
(This is the only info i have from the customer at present and this was like extracting teeth!)
Pulling Wheels from Axles - Pull 50Tonnes
Need to graph and record this, will be using a G306
So ideally we dont want any analogue signals, ideally we want the cell to talk comms like modbus/ethernet etc directly to the G3
Any suggestions
(This is the only info i have from the customer at present and this was like extracting teeth!)
