I'm trying to setup a connection to a s7 plc with the following
Westermo MRD-310
Greenbow
S7-314
Netlink Ethernet to MPI
I managed to open a VPN tunnel in Greenbow, and via the cmd prompt, I can manage and ping the local IP for the modem via the internet. But I cannot ping the plc gateway.
If I connect the Netlink directly to my LAN, it picks up the MPI nodes straight away.
The modems local IP is 192.168.3.200
The Netlink connected to one of the LAN ports on the modem is configured as
IP : 192.168.3.201
Mask : 255.255.255.0
Gateway : 192.168.3.200
Westermo MRD-310
Greenbow
S7-314
Netlink Ethernet to MPI
I managed to open a VPN tunnel in Greenbow, and via the cmd prompt, I can manage and ping the local IP for the modem via the internet. But I cannot ping the plc gateway.
If I connect the Netlink directly to my LAN, it picks up the MPI nodes straight away.
The modems local IP is 192.168.3.200
The Netlink connected to one of the LAN ports on the modem is configured as
IP : 192.168.3.201
Mask : 255.255.255.0
Gateway : 192.168.3.200