shaileshkaijkar
Member
Hi
I have problem with cimplicity 7.5 can any buddy help me regarding this.
Actually I am using a cimplicity 7.5 as a SCADA and Delta PLC. The communication between PLC and SCADA is on Modbus. I got a modbus address for Delta Plc as follows
1) Output Coil Y0 - Start from 01281
2) Input X0 – Start from 11025
3) Data Register D0 – Start fro 44097
4) Memory Register M0 – Start from 02049
5) Timer bit T0 – Start from 01537
6) Timer Word T0 – Start from 41537
Now I check all these data on modscan software its coming correctly. But on Cimplicity output coil, input register and data register is showing correctly but whenever I added the memory register or timer bit not timer word ( Its actual / accumulator value of timer) my modbus communication fails. Its shows the device is down.
Thanks and Regards
Shailesh
I have problem with cimplicity 7.5 can any buddy help me regarding this.
Actually I am using a cimplicity 7.5 as a SCADA and Delta PLC. The communication between PLC and SCADA is on Modbus. I got a modbus address for Delta Plc as follows
1) Output Coil Y0 - Start from 01281
2) Input X0 – Start from 11025
3) Data Register D0 – Start fro 44097
4) Memory Register M0 – Start from 02049
5) Timer bit T0 – Start from 01537
6) Timer Word T0 – Start from 41537
Now I check all these data on modscan software its coming correctly. But on Cimplicity output coil, input register and data register is showing correctly but whenever I added the memory register or timer bit not timer word ( Its actual / accumulator value of timer) my modbus communication fails. Its shows the device is down.
Thanks and Regards
Shailesh