2-axis Digital Joystick

chunkheng

Member
C
Join Date
Sep 2007
Location
Malaysia
Posts
9
Hi All,

I plan to use a 2-axis digital joystick in a PLC project.
How many inputs do I need to allocate for the triggering of the joystick's movement (Left-Right, Forward-Reverse)?

Thanks in advanced.
 

Similar Topics

T
1394 Digital AC Multi-Axis Motion Control System
hello all, does anyone know how to download / upload the parameter of 1394 motion control system? what is the software to use?:bonkhead:
Replies
5
Views
2,903
alan_505
A
V
Micro850 + Sensor: 1 Axis can not move in negative direction when working together with sensor
Hi everyone, I am working with micro850, a proximity sensor (FOTEK, PL-05P) and a 3DOF serial arm robot. I use MC_MoveRelative to control the...
Replies
1
Views
56
vhs
V
D
Studio 5000 v33 Emulate PLC & HMI with Motion Axis
Hello Experts, I'm wondering if this has been done before if possible to create an Emulate file that have motion control axis? I tried to...
Replies
0
Views
145
DenZ_P
D
M
Axis command position keep dropping down to -2000
Hey guys, I got a carriage that can move with X and Y axe, each side got their own cylinder so left and right. It doesnt happen very often but...
Replies
0
Views
322
Martindag
M
P
B&R Automation PC 910 Maximum number of axis?
Hi PLCs.net! I was curious: How many axis can a B&R APC910 control? Is there a hard limit like certain AB controllers? I'm new to B&R, so would...
Replies
0
Views
367
PreLC
P
Back
Top Bottom