Integrating ALB 1397 & SLC 5/04

chickman69

Guest
C
I am in the process of installing control upgrades for an extrusion line. I procured two new Allen-Bradley 1397 drives (one 150HP and one 30 HP) for the application. I have a SLC 5/04 running the line and I would like to integrate the drives through direct communication vs. analog & discrete I/O. I know the 1397's have direct communication capability with the PLC, but I have never done this before. Can anyone point me the right direction and/or give me some example logic to go by for talking to the drive? What hardware do I need for the communication? I have been searching the allen-bradley site for info, but I am getting no where. This is my first time posting to this site, so I hope there is someone out there who can help.

Thanks!

Chris
 

Similar Topics

S
Integrating a Click Plus PLC with Zebra ZT230
I am trying to set a bit to command the Zebra ZT230 to print a label and receive a confirmation bit from the unit via an Automation Direct Click...
Replies
0
Views
669
sharmeyer
S
M
Integrating Balluff RFID reader via EtherNet/IP Explicit Messaging
Good afternoon! For the past several days, I have been trying to set up this Balluff BIS018A RFID head to communicate with a Do-more BRX DM1E-M-D...
Replies
10
Views
5,559
AlfredoQuintero
A
J
Integrating numbers from Analog Input
Hello, I have a application where a analog input will be constantly updating a value in a PLC. What I want to do is mathematically integrate these...
Replies
10
Views
2,427
Mispeld
M
D
Problem with integrating OPC-HMI
Hello I really need help here.. So I upgraded my wonderware from 10.0 to 10.5 edition. When I try to connecting the OPC(in PC1) to Intouch (In...
Replies
5
Views
1,399
widelto
widelto
M
Integrating analog module in GP pro EX
I'm trying to integrate an analog module EXM-AMM 3HT as an extension for Pfxlm 4301 taddc. The documentation I've found so far is awfull. How does...
Replies
0
Views
1,321
mocca-fixer
M
Back
Top Bottom