DH+ and 5/04 Passthrough

Cmaas73

Member
Join Date
Jun 2006
Location
Wisconsin
Posts
27
I had this working a couple years ago but can't seem to now. I have a 5/04 with a PV900 connected by DH+. I want to see the PV in RSLinx classic. I've enabled S:34/5 and made S:34/1 YES but can't seem to see the PV passing through to DF1. Any help would be great, thank you
 

Similar Topics

Hi All, I've got a panelview 600 connected on DH+ to a SLC 5/02. Had a sensor issue I was trying to trace, so I connected my laptop to the PV...
Replies
5
Views
1,412
Hi All, For some days now I have been working on a pass-through link with my Weintek CMT-SVR and Siemens S7-315-2DP. Hardware: Weintek...
Replies
3
Views
6,882
I recently separated the office network from the Plant network with a firewall and my PC is on the office side. I have to VPN into the plant...
Replies
7
Views
3,695
I have a little project involving a pair of NS10 HMI's linked to a pair of CJ2 PLC's via ethernet. In addition I will have a CQM1H PLC hooked to...
Replies
2
Views
3,374
Greetings, We have a site that has 2x SLC5/04's that are connected via DH+ through to an archaic Scada system. We are in the process of upgrading...
Replies
0
Views
1,703
Back
Top Bottom