How made RAmp UP in RSLOGIC 5000?
An example :
when compressor running and press discharge (PT_1102) have value 17 kg/cm2, press header (PT_1105) have value 18 kg/cm2, PV_1102 will be open by logic to arrange PT_1102 to PT_1105.
then PV_1102 will be open with ramp up 1kg/cm2 for 15 seconds (arrange pressure PT_1102 through almost same PT_1105)
Thanks & Regards,
Arief AB.
An example :
when compressor running and press discharge (PT_1102) have value 17 kg/cm2, press header (PT_1105) have value 18 kg/cm2, PV_1102 will be open by logic to arrange PT_1102 to PT_1105.
then PV_1102 will be open with ramp up 1kg/cm2 for 15 seconds (arrange pressure PT_1102 through almost same PT_1105)
Thanks & Regards,
Arief AB.