Some of the questions about SLC500

I have SLC5/05 like this

Duty PLC
slot0=1747-l553
slot1=1747-bsn

Standby PLC
slot0=1747-l553
slot1=1747-bsn

Rack 1
1794-PS3
1794-ASB
1794-IB32
1794-IE12
1794-IE12
1794-IE12
1794-IE12
1794-OE12
1794-OE12
1794-OE12


Rack 2
1794-PS13
1794-ASB
1794-IB32
1794-IB32
1794-IB32
1794-IB32
1794-IB32
1794-IB32
1794-IB32


Rack3
1794-PS13
1794-ASB
1794-OB16
1794-OB16
1794-OB16
1794-OB16
1794-OB16
1794-OB16


Rack4
1794-PS13
1794-ASB
1794-OB16
1794-OB16
1794-OB16
1794-OB16
1794-OB16
1794-OB16


this is my configuration , my question is how i can configure this at RSLogix500 to read all addressing from previous modules. please help me ASAP

While I haven't used a BSN module, it it's anything like an SN module using the RIO: The data mapping is determined in part by switch settings on the ASB modules located in the remote racks. This, coupled with the way you have the module (SN, BSN) set up in RsLogix determines where in the datatable the data is. I know of no way to directly show I/O modules in RsLogix for the RIO network.

(Not sure if this answers your question)