Sustitute S5 IP 241 (6ES5 241-1AA11)?

LaRocca

Member
LaRocca
Join Date
Jul 2003
Posts
41
Hello..


I would like to change and old PLC Siemens S5-135 for new one S7, but I have a little problem. Which modules can I use as spare part / replace for an IP 241 (6ES5 241-1AA11) to one in S7?

I have some caracteristic of the encoders: STEGMANN AG100 / MSSI / 360º/ BCD / Parallel The absolute encoders can be supplied with SSI:rolleyes:

The IP 241 "6ES5 241-1AA12" position decoder modul and Digital position encoder,adapter submodule (1 channel), absolute, Dual-/BCD code. :D

Best Regards :cool:
 

Similar Topics

P
How to connect to Schneider M241 PLC remotely from EcoStruxure Machine Expert software using SSH tunnelling?
Hello, As part of our project, we are using an M241 controller. This controller interfaces with an industrial computer and a router via a switch...
Replies
2
Views
99
Para
P
I
CB1241 RS485 Board LED's not lighting up with S7-1200 1215C
Hi all, I am trying to do Modbus communications via the CB1241 RS485 Communication Board on a Siemens S71200 PLC. I am using a 1215C CPU. After...
Replies
6
Views
252
tarik1978
T
E
M241 - Schneider - Upload
Hello, Recently I was asked to analyze the logic of the air conditioning system in one of our departments. The PLC that controls this system is...
Replies
2
Views
149
edrHeihel
E
P
Factory reset M241
Hi all, I've read the thread below which is similar to my situation... https://www.plctalk.net/qanda/showthread.php?t=127711 But I am unable to...
Replies
3
Views
607
Lare
L
B
Schneider Electric M241
I have a machine that has M241 PLC. I need to add a couple of outputs to the program, and I don't have the original code. Am I screwed or can I...
Replies
1
Views
471
Lare
L
Back
Top Bottom