bobwithdana
Member
Keep your brain active and think about it:
if
2 + 3 = 10
7 + 2 = 63
6 + 5 = 66
8 + 4 = 96
Then:
9 + 7 = ????
if
2 + 3 = 10
7 + 2 = 63
6 + 5 = 66
8 + 4 = 96
Then:
9 + 7 = ????
Anyone?????????
- Thread starter bobwithdana
- Start date
Kent Hostetler
Member
- Join Date
- Jan 2005
- Posts
- 84
yup, i get 144 too.
(as confirmation, 10 + 8 = 180)
(as confirmation, 10 + 8 = 180)
danplc
Member
(9+7)* 9 = 144.
shoelesscraig
Member
This is why I changed majors in college from math to something else...gives me a headache
bobwithdana
Member
OP
Thanks
Last edited:
L D[AR2P#0.0]
Lifetime Supporting Member
Here's another example of overloading the + operator
If
2 + 3 = 1
7 + 2 = 25
6 + 5 = 1
8 + 4 = 16
Then:
9 + 7 = ????
If
2 + 3 = 1
7 + 2 = 25
6 + 5 = 1
8 + 4 = 16
Then:
9 + 7 = ????
L D[AR2P#0.0]
Lifetime Supporting Member
Yep, z=(x-y)*(x-y)
Similar Topics
I received an email from a student with the following code attached. This is supposed to control a floodgate system, and supposed to be written...
does anyone have an install or know if/where i can download it for the following
"ABB PS501 Control Builder Plus V2.3 "
the software was a free...
They are installed in a control panel that was made in France and are intended for the termination of analog inputs. Each of the red capped...
Hello everyone,
I am currently working on a project that uses a Rockwell L33ER controller and the FTV Studio V13 as Supervisory computer...
I have an old PLC (circa 2007) consisting of Telemecanique/Modicon/Schneider Electric devices.
The system has developed errors and unfortunately...