cable comm AB

indra

Member
Join Date
Apr 2005
Location
indonesia
Posts
161
Hi,

Does anyone can help me to get the right P/N for orderin the cable communication that is used for online between NOTEBOOK RS232 and CPU MICROLOGIX 1200 ALLENBRADLEY.
Please also send me the CATALOG or SPECIFICATION drawing of this cable.

Regards,

INDRA
 
The RS-232 programming cable for all MicroLogix family controllers is part number:

1761-CBL-PM02

The pinout can be found in the RA Knowledgebase document Answer ID # 18942 (TechConnect Authorization Required). Because of the 90-degree Mini-DIN8 connector on the MicroLogix end, I strongly recommend purchasing instead of fabricating this cable.
 
Last edited:
See the MicroLogix 1200 Manual on Rockwell website.
The Publication Number is 1762-UM001F-EN-P - January 2010

The part number of cable is 1761-CBL-PM02

Sorry: I guess Ken beat me to it.
 
Hi everyone,

Thank you very much for all your fast reply.
Anyway, this cable also can be used for MICROLOGIX 1000 ?

indra
 

Similar Topics

After updating a panel, I inherited another PLC for my "learning lab". It's a Modicon TSX Micro. I've not worked with a Modicon PLC yet, so I...
Replies
1
Views
128
I was trying to connect a HMI (EZTouch Panel) to SLC500. The HMI had a PLC port (RS232/RS/422/485) 15 pin D-female connector. The PLC had a RJ45...
Replies
6
Views
2,725
I am trying to connect to a G.E. sy/max plc, the software runs on dos and it is version 2.03. I have a picture of the cable it has NRD on one end...
Replies
6
Views
1,537
I have a PV600 (2711-T6C16L1) Ser B, Rev C, FRN 4.43 . I successfully downloaded a PV program to it using a 2711-NC13 cable. However, that...
Replies
18
Views
3,608
Hi All, Anyone know what is the cable used to upload the backup HMI program for Stahl Exicom?
Replies
0
Views
1,495
Back
Top Bottom