SLC5/04 for DH+ connection
- Thread starter angi
- Start date
geniusintraining
Lifetime Supporting Member + Moderator
Hello,
Yes the PCM5 has an adapter on the end the should go on the end of the cable 1784-CP7 this is a 9 pin to round mini din... you also need a 1784-PCMK (A or B) that must match the cable
Yes the PCM5 has an adapter on the end the should go on the end of the cable 1784-CP7 this is a 9 pin to round mini din... you also need a 1784-PCMK (A or B) that must match the cable
Similar Topics
I have a little problem. I have a number of now classic SLC5/05's with which I am hoping to connect to Weidmuller ER20-FCB-EIP I/O nodes. I have...
I rarely come across machines at a customers shop with a SLC5/05 in it, however I have a new customer that has 2.
I can connect through RSLinx...
Hi,
I just borrow a SLC5/05 processor, I don't know its Ethernet port's IP address, and also unkown DF1 slave node and other parameters. How...
Dear all,
Now,I've a PanelView 1000,and I want to connect it to SLC 5/05 through ETHERNET .After I finalized my tags and adjusted the connection...
Hi,
I'm beginner in PLC's so my problem can be very simple :). I use Allan Bradley card 1784-KTX card for DH+ and RSLinx 2.43. Card is already...