roxtech
Member
Hi Dears,
we have two OP25(Controlling two master drives on profibus L2-dp) with our plc S5, cpu 948 and IM308C. One Op25 became faulty. Now we want to control both master drives with one op25. I converted screens in working op25 through copy past. tag automatically copy with screen. I also assign keys for screen controls. I checked op25 offline all screen control is OK and tag assignment also OK.
Now problem is both op25 have different area of pointer.
faulty op25 have DB96 DW0 length 255.
working op25 have DB176 DW0 Length 255.
If I do not use or copy area pointer to new program.
What Happen?
Is it work for both drives?
what mean of area pointer? while tag have there own address for example speed drive one DB10 Dw46.
please help me before connecting op25 to profi bus.
Regards,
we have two OP25(Controlling two master drives on profibus L2-dp) with our plc S5, cpu 948 and IM308C. One Op25 became faulty. Now we want to control both master drives with one op25. I converted screens in working op25 through copy past. tag automatically copy with screen. I also assign keys for screen controls. I checked op25 offline all screen control is OK and tag assignment also OK.
Now problem is both op25 have different area of pointer.
faulty op25 have DB96 DW0 length 255.
working op25 have DB176 DW0 Length 255.
If I do not use or copy area pointer to new program.
What Happen?
Is it work for both drives?
what mean of area pointer? while tag have there own address for example speed drive one DB10 Dw46.
please help me before connecting op25 to profi bus.
Regards,
