Ethernet communication between PLC5/20B serie E and ABB PM861

wael007

Member
W
Join Date
Mar 2010
Location
tunis
Posts
1
plz i need to know if i can add an ethernet model to the cpu 1785-L20B/E (plc5) and if yes, where did i must place it? other thing, i need to know if ethernet communication can be used between this controller and ABB PM861.

thank u!
 

Similar Topics

C
Ethernet communication problems between CJ2M and NB5Q
unexpected problem happening when connecting said panel to a CJ2M-CPU35 via Ethernet (was replacement of broken NT21 via NT Link). The machine...
Replies
0
Views
650
CX_Luigi
C
F
Ethernet communication between CJ2M and Lenze SMV Drive
Hi All, I am having issues communicating between an Omron CJ2M PLC and a Lenze SMV Drive (with Ethernet Module). I have set up Network...
Replies
1
Views
1,142
forqnc
F
H
Ethernet/ip communication between ML1400 and Productivity 1000
Hello, I am trying to use micrologix 1400 Ver.A as adapter and a Productivity P1-540 as scanner, only Ethernet/IP is supported by ML1400 Ver.A...
Replies
2
Views
1,853
halosome
H
A
ethernet Communication between Delta HMI and Siemens PLC S7-300
hello dear we have a problem with communicate with delta dop hmi and siemens s7-300 cpu . we use ISO ON TCP connection and AG-SEND and AG-RECV...
Replies
2
Views
3,492
boneless
boneless
A
Communication between PLC and PC through Ethernet module
Hi All, I have a machine having Mitsubishi Q series (Q02) CPU. There is a dedicated software for machine which operate through PC (window based)...
Replies
4
Views
1,985
Asad Abbas
A
Back
Top Bottom