Juan Stephens
Member
I'm looking for cable and software to program a Mitsubishi FXos-30MR-ES. Can any one help?
Thanks,
Juan
Thanks,
Juan
Electrician needs help
- Thread starter Juan Stephens
- Start date
BTalbot
Member
Cable P/N SC-09 (RS232 on PC end)
Theirs a USB cable available but the p/n escapes me
Software P/N GX-DEV-FX-C1
Check their website for the closest distributor to you
www.meau.com
Theirs a USB cable available but the p/n escapes me
Software P/N GX-DEV-FX-C1
Check their website for the closest distributor to you
www.meau.com
geniusintraining
Lifetime Supporting Member + Moderator
If your program is smaller the 1k words you can use the demo version of GX, 1k words is a good size program and may work for your 30MR
I can help with the cable, just need to know if you need USB or serial www.plctrainer.net
I can help with the cable, just need to know if you need USB or serial www.plctrainer.net
Similar Topics
[B]:bonkhead:
Simple question to some, mostly folk with electrician capabilities. I worked with and wired and programmed PLC's for over 30 years...
I am an electrician… for a long time. I was the relay guy. In the mid 1980’s, we began using PLC’s. PLC, PLC2.
The programming faceplate...
Hello, I'm a electrician who is furthering my education and learning to be a programer , I have a Dell laptop running windows 7 with rs logics pro...
https://www.yahoo.com/news/the-shhh-ocking-discovery-made-by-two-workmen-when-092740245.html
