Siemens FB283 program example needed

Hey, i a workmate have a Siemens s120 drive that he wanna drive to a position and stop there,
after reading here
http://support.automation.siemens.com/WW/view/en/25166781
and looked at the files i realize that he need to use telegram 110 and FB 283.

but the VAT table for MDI that is in the exmple is in German,

does any one have a program exemple that shows how to control with FB 283?

or does any one have a translated vat table?

thanks,

Theres a simple FB using Telegram 111 in the DOWNLOAD section under Siemens
Try it out

JRW said:

Theres a simple FB using Telegram 111 in the DOWNLOAD section under Siemens
Try it out

Click to expand...

i have look at them but i dont really understand how to use it,
and the VAT table that is there is in German.

so i wonder if anyone have used it and can give me an example
or if someone have that VAT table in English,
so it can be easier to understand how to control the servo with FB283

There is a complete manual for using FB283.
Also it follows the function diagram information. Study the EPOS function diagrams