majune11
Member
i would like to know if it is possible to convert a 0-10v signal into a -10-10v signal, and how?
tnx...
tnx...
signal converter
- Thread starter majune11
- Start date
Similar Topics
Hello guys,
can you please recommend a robust and reliable signal converter 0-5V (or 1-5V) to 4-20 mA?
I need to measure voltages between mainly...
hola buenas tardes
Tengo que comunicar un lector de codigo de barras con un compact logix a traves de un convertidor de señal 232 balluf que va...
I need to go from a powered 4-20mA output (i.e. transmitter supplies voltage) to an Allen Bradley HART input card 1756-IF16H. I cannot set input...
I have an existing machine with an IFM RN6057 encoder (dat sheet attached) fitted.
This encoder has 2 outputs:
- SSI singleturn
- Incremental...
I am not sure why this is requested, but it was asked.
Currently I have one PLC , with one output to a relay, turning on a field equipment (just...
