Siemens and Primary Setup Tool

Can the primary setup tool be used to change the IP address of a 300 series PLC? Please see attached screen shot to verify my thought process.

I think yes. Not sure if there are limitiations if the CPU has an IP address already.

I always simply use to download the HW Config (incl. IP address) from the HW Config editor. This works every time, also if the CPU already has an IP address.

yes PST allows you to setup IP address allocation...

also see this link.
http://support.automation.siemens.c...tandard&viewreg=WW&objid=10805159&treeLang=en