Ethernet with CP1613

antoine

Member
A
Join Date
Sep 2002
Posts
62
Hi all,

I have a computer connected to a netywork through a CP1613.
This is for S7 communication.

Others PC's are also connected to that network through their NIC.

Is it possible to establish a "standard" ethenrnet connection through my CP1613 to share files and printers on the network ???

Antoine
 

Similar Topics

M
Sending data to ethernet with cp1613?
Hello everyone! If there is anyone good in ethernet communications please help me. I would like to send data blocks to ethernet (and the other guy...
Replies
0
Views
2,021
msamardzic
M
A
reading data from siemens controller (profinet) to ethernet/IP controller
Hello I have a s7-1200 and I would like to read the tags present in this controller with my controllogix controller. The two controllers don't use...
Replies
4
Views
48
JesperMP
JesperMP
K
use Simotion D ethernet port as gate to access S7-1500 plc program
Can we use a Simotion D455 ethernet port x127 as a gate, to access S7-1500 plc Tia Portal program ? In the Simatic manager, we used Netpro to do...
Replies
2
Views
83
mk42
M
S
Powerflex 755 - Hardwired & Ethernet in Parallel
So I have a sort of unique situation where I'm wanting to run a PF755 from the IO and over ethernet. Of course, this comes with it's own set of...
Replies
9
Views
259
sparkie
S
afm
Ethernet Dongles for PC-to-PLC connection?
Hi all, My ethernet port on my laptop recently broke and I was hoping to just use a usb-c dongle in the mean time to go live on my PLC until I...
Replies
14
Views
453
JesperMP
JesperMP
Back
Top Bottom