Mitsi ethernet programming with virtual comm port

cjd1965

Lifetime Supporting Member
C
Join Date
Apr 2007
Location
UK
Posts
1,659
Hi
Scenario is a Mitsi PLC which is connected to an E- Terminal using a CPU direct serial cable.

I have been told that i can use transparent mode to hook up to the E-Terminal with ETHERNET and a virtual comm port and program the PLC via the E Terminal

I know Tibbo has been suggested as a virtual comm port

Anyone have experience or a tech note for this?
 

Similar Topics

J
mitsi q series ethernet qj71e71-100.
hi all regarding : mitsi q series ethernet qj71e71-100. there's an old coax network at a client's chicken factory that's fallen over. it...
Replies
9
Views
1,926
collinsd70
C
P
Mitsi Q03UDE - Share Data over Ethernet
Hi, I have two systems each consisting of a Q03UDE connected to a Beijer E1070 all over Ethernet... I would like to share some REAL's over the...
Replies
5
Views
3,827
parky
P
C
Mitsi Ethernet Set-Up for A-Series CPU
Hello again.:D I am attempting to set up ethernet coms to an A series Mitsi processor. Processor is A1SJH/ Ethernet card is A1SJ71E71N3-T...
Replies
9
Views
4,202
atreloar
atreloar
C
Mitsi Ethernet
Hi, I have been asked to add a module to an existing PLC, which has a processor Q2AS(H). I have looked online and found A1SJ71QE71N-B2 and...
Replies
2
Views
1,782
cjd1965
C
M
Mitsi Q Ethernet
Mitsi Q - Ethernet - anyone know how to read bits using 'readup' instruction? (GX IEC DEveloper) Tried using k4M100 format in place of D register...
Replies
2
Views
2,322
myfriendstan
M
Back
Top Bottom