S5 analog input 6es5 465-7es13

Stikstof

Member
S
Join Date
Jun 2008
Location
Antwerp
Posts
3
I need to replace an 8 channel analog input card to the above mentioned card. I have put the dip switches in the right position to let it work as an 8-bit card, but I need some help on connecting the inputs.

The 4-20mA converters are in the first and third slot.

Anyone has expirience with using these 16-bit cards as 8-bit input cards?
 

Similar Topics

K
Input Analog Jittering
I'm having trouble calming down 2 Tempo Sonics. I'm using Studio 5000 CompactLogix my Raw value is jumping around from 8575.0 to 8755.0 at a...
2 3
Replies
30
Views
1,121
Peter Nachtwey
Peter Nachtwey
U
SLC500 analog input value data type for EZ Series HMI
I cannot add SLC500 analog input tag (I: 8.3) to EZSeries Touch Panel Editor (V 5.3). I used all the listed tag datatype but it all says "Invalid...
Replies
10
Views
257
OkiePC
OkiePC
K
How to add Analog Input into Ignition Designer
Hi, I have questions. I have Analog Input that need to put into Ignition Designer. But I don't know how to put?
Replies
1
Views
118
Old Man
O
K
Omron AD081-V1 Analog Input Card Calibration (Offset & Gain Adjustment)
Omron AD081-V1 Analog Input Card Offset & Gain Adjustment Entering Adjustment Mode 1. Set the input card in adjustment mode (Turn ON Dip SW No-1)...
Replies
0
Views
87
Ko Lin
K
A
AMI0800 Analog Input Module's I/O LED is Lighting up red
Why AMIo800 Analog input module's I/O LED is Lighting up Red? Checked module connections, 4-20ma wires etc but this light is continuously Lighting...
Replies
1
Views
111
nicherbert
N
Back
Top Bottom