first line

jsmith6752

Member
Join Date
Mar 2010
Location
wilminton De
Posts
12
I am attempting to reprogram our GE Series one controller. I have the memory completely cleared. The first line I need to enter is the one that has me confused. After that I think I can manage. The programer is the one that plugs into the front of the PLC. It's probably not considered a hand held??? If someone could walk me through the first line I would appreciate it. If possible walk me through the key stroke to enter this line....thanks
 
It has been too long since I used the hand held programmer but maybe this will help.
Link to manual, see chapter four and five for proramming, see pages 5-21 and 5-28 for a sample of keystrokes for entering code: http://www.*********.com/pdfs/90842c.pdf
See this old thread, might be something there that will help.
Link: http://www.plctalk.net/qanda/archive/index.php/t-9875.html
I googled "ge series one hand held programmer manual" (without the quotes), to find that old thread.
Steve Bailey is the resident expert, maybe he will check in soon to help.
 
Last edited:

Similar Topics

I'm a newbie who started a job as a repair tech recently. I've had plenty of luck with ABBs, Allen Bradleys, and a few others, but I can't seem to...
Replies
1
Views
67
Hi. I’m trying to upload program from existing PLC S7-1200. Create new project in TIA v15.1 then upload. After upload successfully, go online but...
Replies
5
Views
145
Does anyone know of a way to detect if someone is online with the controller in ControlLogix (from logic) I'm thinking that maybe there is a CIP...
Replies
7
Views
294
Word of warning. I had issues with a 5069-AENTR not appearing in IO selection. After downloading the latest version 40 AOP, still didn't appear...
Replies
0
Views
127
Hi, I am using M221 reading from 3 different sensors (modbus rs485) sharing same bus (daisy chain). I am currently using READ_VAR (in total...
Replies
0
Views
68
Back
Top Bottom