Interbus IBS IPC DCB/I-T

ninanderson

Member
N
Join Date
May 2007
Location
Wales
Posts
19
Does anyone out there have the configuration files and/or a manual for the Interbus host controller used with the old Honeywell/Moeller IPC620 PLCs?

The card goes under the Phoenix part number IBS IPC DCB/I-T or Honeywell 621-K0020 or 621-K0025.

I have three cards and the CMD configuration software but no way of using them !
 

Similar Topics

mosama
Interbus ibs s7 300 dsc-t
Dear all, I’m going to use IBS S7 300 DSC-T to communicate with my S7-300 to Interbus I/O modules, but I don’t know how to make the necessary...
Replies
1
Views
2,633
mosama
mosama
W
Interbus IBS S5 DSC error
Hi I have problems with an equipment recently arrives from Europe, I was never before work with Siemens PLC so do not have experience with that...
Replies
0
Views
2,035
wznv0n
W
S
Interbus ibs s5 dcb/it configuration
Hi, Can anyone help me with this interbus module. Its connected to s5 135 U. Can I use step 5 to configure and monitor this module? Is there...
Replies
1
Views
4,029
PLucas
PLucas
A
Phoenix Contact Interbus RFC 430 2730190
I am stuck on fail ctrl error 1013 cannot get IP nor can do firmware update need help pls urgent
Replies
0
Views
170
abdullah333
A
S
Migration Simatic S5 - Lenze 9300 (Interbus) to S7 (profibus)
Hi All, I am currently working on a Simatic S5 upgrade to the S7-400. The currently installed configuration PLC is connected to 3 LENZE 9300...
Replies
5
Views
3,317
sigmadelta
S
Back
Top Bottom