S7 diagnosing IO device

Frederik madsen

Member
F
Join Date
Sep 2009
Location
jylland
Posts
11
Hi, need som advice regarding setup diagnosing IO devices for profinet.
System:
IM151-8 siemens plc
IO´s Wago 750-370 profinet.

Problem: Need program for monitoring, when and where errors accour on IO slots.

o_O
 

Similar Topics

S
Diagnosing Series 6+ CCM/CPU Communications Fault
I've picked up a Series 6+ PLC (and a lot of cards) recently and am trying to get the unit running, however when I install a CCM into the unit, it...
Replies
6
Views
3,018
Sukasa
S
E
Diagnosing Leaky Wave (Radiating Cable) Wireless Systems
Hello Everybody. As a part of my job I try to diagnose various industrial wireless systems. 90 percent are leaky wave or so called radiating...
Replies
1
Views
2,860
danw
danw
R
Diagnosing a Siemens EM232 module problem
I'm new here. I'll make this, hopefully, as clear and concise as possible. I am using a s7-200 siemens plc cpu type 224xp with the em232 analog...
Replies
1
Views
3,168
rbduck1
R
JesperMP
Diagnosing ethernet-based fieldbuses.
Hi all. We are slowly moving away from Profibus towards Profinet. What I worry about now, is how to diagnose basic hardware faults with Profinet...
Replies
3
Views
1,932
JesperMP
JesperMP
JesperMP
Diagnosing Profibus with a scope.
Hi. I have seen some instructions for diagnosing DH+ with a scope. And I have heard that it should also be possible with Profibus. Does anyone...
2
Replies
23
Views
10,822
grnick50
G
Back
Top Bottom