Densimeter

Hi all,
I want to know if someone knows a densimeter to read in tanks.
It is a static solution between 1000 and 1200, with a pH=8 and a sometimes solids in suspension.

I'll appreciate any heads up.

Thanks

We do this by pumping fluid from the tank around a loop containing a Coriolis flowmeter set up to measure density and viscosity. The solids in suspension may be an issue but in our case (flour and water) the meter flags up that the fluid is inhomogeneous but continues to give good density/viscosity readings. This is not cheap but works very well.

put two pressure gauges on a known distance and read them both that will give you the density. and you can also make a tank full now you know the density.

Thanks for the answers.
I talk with the client... it seems he prefers a cheaper option... we will start jut with temperature