Urgent Help - WinCC 6.0 SP4 OPC Server

Plankman

Member
P
Join Date
Apr 2006
Location
Durban
Posts
6
Hi there

I'm trying to install OPC Server on a WinCC Client PC. WinCC is running and everything is working. When I try to install OPC Server, I get a message saying I have to reboot the PC and start install again. I've rebooted about 10 times now and still get the same message. Any ideas? I need to get this working as I have an OPC client I wrote for reporting purposes that is currently looking at 1350 tags and is putting some strain on the server, so I want to shift the workload to a pc that isn't used often
 

Similar Topics

S
could not access Smart server in Wincc flexible (urgent help)
Hi, i am working on a project. and its HMI is remotely control so for that I am using the option of smart server in WinCC flexible but I am...
Replies
5
Views
2,801
JesperMP
JesperMP
N
Urgent Help Wincc communication
Hello All, On a plant Wincc Pc was breakdown.Loaded windows2000, wincc6.0 and simatic maneger with cp5611. I made format and load all project...
Replies
0
Views
1,589
necyil
N
G
Urgent help needed: old Telemecanique/Modicon/Schneider Electric (TSXP5710). Will compensate anyone who can assist!
I have an old PLC (circa 2007) consisting of Telemecanique/Modicon/Schneider Electric devices. The system has developed errors and unfortunately...
Replies
2
Views
230
greekgremlin
G
Q
Logix 1756 5575 Redundancy Issue -- Urgent Help Requested
Guys, please help me with this urgently. We have Logic 5575 installed in hot n standby setup. For some reason, the primary now cannot sync with...
Replies
10
Views
378
QasimFSH
Q
A
Urgent need of help in Vijeo Citect 7.4
I have DI module ICPCon M7024UD connect to my pc using COM3 MODBUS RTU and also RHT sensors are using MODBUS TCPIP.. The problem is, it cannot...
Replies
9
Views
1,667
Aimin Ariff
A
Back
Top Bottom