Adding sAO table to MOSCAD

jtn

Member
jtn
Join Date
Jan 2006
Location
Washington
Posts
256
When I append the user table with an sAO multiple column table and click OK, the next window pops up where you enter a column name and the last index. These fields are not editable and the field that should show that the table is an sAO table is greyed out and is blank. Any tips or ideas on where I am going wrong? This is happenening on Toolbox version 9.52 and 9.54.
 

Similar Topics

C
Adding PanelView Plus 7 to the network
Hi Everyone, Currently we have three plants running with Controllogix PLCs (L72, L73, L74). In each of these plants we have 2 FTView SE...
Replies
0
Views
54
celso3093
C
B
Adding IB16S to the IO configuration - Logix Designer v31
Hello, Im building project with 1756-L82ES controller and 1756-IB16S card but i cant find it when trying to add the card to IO configuration...
Replies
3
Views
135
robertmee
R
J
Adding Produced and Consumed Tags with redundant 1756-L71 controllers
Hello, I have a pair of redundant 1756-L71 controllers rev 24. These controllers currently have produced and consumed tag interfaces to 3 other...
Replies
2
Views
158
johnplatt55
J
P
Adding IAI Ethernet Device to Studio 5000 PLC V32.02 - Yellow Triangle
I'm adding an IAI Gateway with 2 axes connected to it. To an ethernet network on my PLC. So, I think the math is correct on the Input and Output...
Replies
0
Views
143
psychosunshine
P
S
adding a 2nd HMI
Hi Folks. I am gearing up to add a 2nd identical HMI to a project. This 2nd HMI will basically be an exact clone of the 1st one. The equipment...
Replies
3
Views
258
chavak
chavak
Back
Top Bottom